PowerMix Trinity in a Taylor 514-CE steel string acoustic guitar. This tune is called "Summer Song," written and played by fingerstyle artist Bryan Roberts. Bryan used a B -F# -C# -F# -B - F# tuning. The recording has a touch of chorus and reverb and was converted to MP3 using Creative MediaSource Player. Right-click to download: Summer Song ft. PowerMix Trinity
PowerMix Trinity in a CA Bluegrass Performer steelstring acoustic guitar with graphite top and neck and composite body. It is mixed 100% Pure pickup, 50% mic, 50% FanTaStick undersaddle pickup. This is an excerpt of the tune "Northwest Passages," from Dietri's second CD "Northwest Passages." Recorded and MP3 converted on Cakewalk Pro Audio 9 software. Right-click to download: Northwest Passages ft. PowerMix Trinity
This clip compares the individual compoments of the PowerMix System. Played by Dietri on a Martin DM steelstring acoustic guitar with the PowerMix Trinity System. This is a demonstration of the three individual systems that make up the PowerMix Trinity System: the Trinity (Pure pickup + mic), the PowerMix Pure (Pure pickup + undersaddle pickup), and the PowerMix Trinity (Pure pickup + undersaddle pickup + mic). Recorded and MP3 converted on Cakewalk Pro Audio 9 software. Right-click to download: PowerMix Components
The PowerMix Trinity System is a triple-source pickup/pickup/microphone combination system with onboard preamp. It consists of:
The PowerMix Trinity System takes advantage of the natural woody tone quality of the Pure pickup and adds the power and definition of the FanTaStick for high volume situations or if you need your guitar to stand out against a band. Use the internal mic to add air, harmonics, and the most natural timbre possible.
The PowerMix Trinity Preamp allows for precise sound adjustment of each of the three sources. It features gain, bass, mid, treble and volume controls for each individual channel and uses low-power consumption parts so that the battery life is up to 120 hours. The output jack is a high quality Switchcraft endpinjack, wired so all 3 channels are mixed together for mono use with a standard guitar cord.
The preamp can be installed under the sound hole for easy access or hidden deeper inside the guitar.
The preamp can be installed under the sound hole for easy access or hidden deeper inside the guitar. The removable attachment system will not damage your guitar's label. For initial adjustment, we recommend a sound hole placement of the preamp. After you are finished adjusting your personal sound, you can choose to position the preamp deeper inside the guitar. The double volume control element is attached to the inside edge of the sound hole and allows for quick volume adjustment of each pickup channel.
All parts of the system can be installed non-destructively without drilling any holes other than the endpin hole. The components are meticulously phase aligned.
©K&K Sound Systems Inc | The Acoustic Pickup Authority
92798 Cape Arago Hwy, Coos Bay, Oregon 97420 | 541-888-3517 | Toll Free 1-800-867-6863 | www.kksound.com