Quantum Trinity System

The Quantum Trinity System consists of:

• The super natural Pure Western or Pure Classic guitar bridgeplate transducing system.
• The Trinity Miniature Condenser Mic with integrated 5" gooseneck and 20-20.000 Hz frequency range.
• The Quantum Blender Dual Channel Preamp, specially designed with the Trinity System in mind. But this unit goes one step further: Two fully independent channels feature special tailored powerful 3-band EQ, phase reverse switches, gain and volume controls. Mixed output options in both active-balanced and 1/4" line-level format, individual outputs, stereo and mono inputs, and effect loop. Channel one is switchable from mic to pickup impedance. All this, plus K&K's ultra low noise circuitry.
• Also includes a stereo endpin jack and a 6-foot stereo cable

Three Quantum Trinity models are available:

• Quantum Trinity Western Mini - For steel string guitars. We now recommend the mini pickups for all acoustic guitars. Permanent installation with superglue is required for optimum performance. We are proud to announce that our engineers succeeded in raising the output level of the Pure Western Mini by about 15% which makes it now almost as powerful as the bigger Pure pickups. This pickup system will fit ANY guitar!
  
  
• Quantum Trinity Western Removable - For steel string guitars. We recommend this pickup system with larger transducer heads if a removable installation is desired. Please check for the bridgeplate size of your guitar before you order. Click here for an original size diagram of the Pure Western Removable.
  
  
• Quantum Trinity Classic - For classic/nylon string guitars.

The Quantum Trinity Western Removable can be attached and safely removed without any damage to instrument or pickups. Our special polyester "on tape" mounting system guarantees safe adhesion plus easy removal. Stick the tape to the bridgeplate first and superglue the pickups to the tape. If you want to remove the system simply pull off the tape.


The Quantum Trinity System is our top-of-the-line, versatile pickup/mic combination with blender preamp. It was designed for the acoustic guitar, but it can be fitted to many different instruments. If you want to install the Quantum Trinity System on another instrument, we can supply you with the right pickup for your needs. The mic can be mounted in a number of positions, including elevated ones, due to its integrated 5" gooseneck. It comes with a special self adhesive gooseneck mounting hardware (as shown in diagram above). The Quantum Blender allows for mixing a piezo transducer with a microphone, magnetic pickup or another piezo pickup. It can be used with any "2 wire" powered lavalier type condenser mic or with a piezo or magnetic pickup. With an appropriate microphone impedance matching transformer a dynamic mic can be used as well. Channel 2 is designed with K&K's Trinity System or Pure Western/Classic in mind, but it works well with all types of piezo transducers.


Technical Information for the Trinity Microphone:
Frequency range mic: 20 - 20,000 Hz
Sensitivity mic: 8 mV / PA / 1 kHz
Maximum SPL mic: 133dB
Polar Pattern mic: Soft cardioid
Power Supply: 1.5 - 9 volt
Total Power consumption: 2.7 mA
Output: low impedance 1/4"

Read what our satisfied customers have to say about this product.

Read reviews of this product.

Pure Western Manual (Mini or Standard)

Trinity Microphone Manual (12 KB)

Quantum Blender Manual (21 KB)