Mandolin Twin

The Mandolin Twin is a dual-head retrofit mandolin transducer. It reproduces the original mandolin tone with very natural tone quality and it is highly feedback resistant. It is used by high end Mandolin builders like Clark Mandolins and by many professional players.

The Mandolin Twin Internal is a fully internal pickup system. Both the transducers and the endpin-jack are mounted inside the mandolin. The transducers are attached with double-sided adhesive tape, providing a robust installation with minimum sound interference. Installation of this system should be done by an experienced luthier or mandolin tech. If you are looking for a system that is easy to install by yourself please check out our Mandolin Twin Fusion system.

The Mandolin Twin Fusion does not require any permanent alteration to your instrument. The pickups attach to the inside of the mandolin with double-sided adhesive tape, while the carpenter jack remains on the outside of the instrument. It provides the exact same sound quality as the Mandolin Twin Internal because the pickups are mounted in the same positions. The Mandolin Twin Fusion can easily be installed by the musician. A comprehensive step-by-step installation manual describes the process in detail. Special installation tools are provided.

With acoustic amps, both Mandolin Twins work very well in passive mode. To connect to a PA system, we recommend a suitable preamp like the Pure Preamp or the Pure XLR Preamp.

Technical Specs

Mandolin Twin Internal

Cable length: 7"
Pickup size: 16.5 x 23mm
Impedance: High ohmic
Jack: Stereo TRSS endpin jack 1/4" wired mono.

Mandolin Twin Fusion

Cable length: 11"
Pickup size: 16.5 x 23mm
Impedance: High ohmic
Jack: Stereo TRSS endpin jack wired mono